3m Single mode MPO MTP Fiber Optic Cable 12 Fibers

The MPO/MTP Trunk Cable is designs for data center applications. It is divided into round cable and flat cable with the outer diameter of 3.0mm or 4.5mm. The connector where this cable is terminated on is the so called MPO connector. All of MPO/MTP fiber optic patch cables are 100% optically tested for maximum performance. We have all lengths and connectors available.

3m MPO/MTP 9/125μm Single-mode Standard Trunk Cable 12 Fibers

MPO/MTP multi-fiber system is designed for the reliable and quick operations in data centers, where the obvious benefits are less space requirements and improved scalability, which providing
significant space and cost savings.

FiberStore offer various MTP/MPO products such as MPO/MTP cassettes, MPO/MTP modules and patch panels. Our MPO fiber patch connectors utilize precision molded MT ferrules, with metal guide pins and precise housing dimensions to ensure fiber alignment when mating and are fully compliant with TIA/EI942, ISO/IEC 24764 and EN 50173-5, which are specific data center standards. The hybrid MPO fiber cables can be mass terminated in combinations of 24~144 fibers ribbon/bunch cables, and the connector includs FC, SC, ST and LC, the cable polish UPC and APC. Optional Lengths available and provide secure transition between MPO/MTP and LC/SC/FC/ST connections. Available in singlemode (9/125μm), multimode(50 or 62.5/125μm) and 10Gig fiber.

Features
  • Easy connection and disconnection
  • Factory finished MPO plugs
  • Low smoke zero halogen (LSZH)jacket
  • Push-on / Pull-off latching connector
  • Each MPO connector is polished according the polished end-face quality specification standard.
Applications
  • Local Area Networks
  • Data Centres
  • Campus Networks
  • Storage Area Networks
Technical Details
  • Connector 1: MPO Female(No Pins)
  • Connector 2: MPO
  • Fibre types: OS2 9/125um
  • Fiber Polish: UPC
  • Colour: Yellow
  • Fiber Length: 3 meters
  • Cable Standard: 12-Fiber
  • Number of Fibres Per Cable: 12 Fibers(1 MPO/MTP connector on each side)
  • MPO Connector standard: IEC 61754-7 series
  • Fire rating: LSZH
Packaging

The MPO patch cable is supplied protected in a plastic bag and packed in a carton box. Each cable has two identification labels, each containing: barcode, part number, factory order number, cable lengths and unique serial number.

Pre-terminated System Installation

To ensure entire connection is in a unify condition, we need to first install patch panel, cassette module and related mounting hardware. Then, say the cables in designed cable passage position, remove all the protection caps and wraps, connect MPO and to all the related MPO sockets, mount and secure the cables with cable ties, simple as that.

If you would like to purchase our MPO cable or want to know more about our fiber optic productshow much does fiber optic cable cost, please visit our website or contact us.

Overview of CWDM Mux and DWDM Multiplexer

As the CWDM Mux/demux and DWDM mux/demux goods are playing an even more and more important role inside the data transmission field, today organic beef focus on the key options that come with CWDM mux and DWDM mux first.

As everybody knows, the CWDM Mux / demux module is based on dielectric thin-film technology designed for integration in low cost Metro and Access networks. These include applications such as fiber to the home, business or curb. The module enables 4 or 8 channels to be either combined (added) or separated (dropped). The fileters operate with a channel spacing of 20nm corresponding to standard CWDM wavelengths. CWDM Mux Demux module is a device to allow multiple optical signals at different wavelengths to pass through a single optical fiber strand. The common configuration of CWDM mux/demux module is 2CH, 4CH, 8CH, 16CH, 18CH CWDM mux/demux module. 3 Single fiber or dual fiber connection for CWDM Mux/demux are available. FiberStore’s CWDM modules has low insertion loss, high channel isolation, flat passband. Additional filters, to enable cascading of devices, or addition of 1310nm or other wavelength, can also be included in the module.

The CWDM mux products always own these following features:

> Passive, no electric power required. (MTBF ca. 500 years)
> Low insertion loss
> Accepts any data rate and any protocol on any port up to 10 Gbps, also 40 Gbps (DPSK, DQPSK) and 100 Gbps (DPQPSK)
> Fully transparent at all data rates and protocols from T1 to 40 Gbps
> 1RU Rack-mount chassis Low profile modular design
> Simple to install, requires no configuration or maintenance
> Low-cost transceivers applicable, existing equipment can still be used
> ISO 9001 manufacturing facility

And for the DWDM, which represents Dense Wavelength Division Multiplexing was created to multiplex DWDM channels into one or two fibers. This sort of products could make the optimum usage of your existing fiber optic infrastructure in an ideal way. It puts multiple signals together and sends them simultaneously along a fiber, simply with transmissions happening at different wavelengths, and also this turns an individual fiber to the virtual equal of a handful of fibers. It is really a good and also the most reasonable solution to date that will meet our increasing desires of large data transmissions. And also by using the impressive DWDM technique, it will transmit greater than 40 connections of numerous standards, data rates or protocols more than one common fiber optic link. 

For the DWDM products, the DWDM mux products combine several data signals into one for transporting on the single fiber as the dwdm demux separate the signals into one for transporting on the single fiber as the dwdm mux products combine several data signals into one for transporting on the single fiber as the dwdm demux separate the signals on the opposite end. Each signal reaches a different wavelength, they cooperate with each other perfectly.

The common configuration of DWDM mux is 4, 8, 16 and 32 channels. These DWDM modules passively multiplex the optical signal outputs from 4 or maybe more electronic devices, send on them an 
individual optical fiber and then de-multiplex the signals into separate, distinct signals for input into electronic devices in the opposite end with the fiber optic link.

The DWDM mux products always own these following features:

> Low insertion loss and high isolation.

> Simple to install, requires no configuration, and disassembles easily to clean.

> Fully transparent at all data rates and protocols.

> Completely passive, no power required, no cooling and so on.

As the very best China fiber optic products supplier, FiberStore Inc. provides lots of this sort of products which are reliable and economical. If you may well not find it on our website, you can call us to customize it to suit your needs. For standalone multiplexers, it could increase dual fiber link capacity up to 18 channels and could be combined with a lot of the CWDM GBIC, SFP, XFP, X2, XENPAK, SFP modules. It’s also super easy to make use of and install, and also have some common features because the DWDM mux. If you would like to know our fiber optic cables, optical cable price, indoor outdoor cable and more, please visit our website or contact us.