Optical fiber cable can have connectors installed on one or both ends. If connectors are attached to only one end of a cable, it is known as a pigtail. If connectors are attached to both ends, it is known as a jumper or patch cord.
LC Fiber Optic Patch Cord (LC Fiber Cable)
Description
The LC connectors used are small form-factor fiber optic connectors resembling miniature SC connectors with high quality 1.25mm zirconia ferrules and push-pull latching mechanism. They are fully compatible with existing LC hardware.
In addition to basic testing, some mechanical and environmental tests per IEC or Telcordia are also performed periodically to guarantee the best quality. For standard patch cords, sampling check is performed on ferrule geometry to ensure high percentage of polished connectors meeting GR-326 requirements. For premium grade, ferrule geometry is tested on all patch cords to meet these GR – 326 requirements.
Other than standard single mode and multimode fibers, G655, OM2, and OM3 fibers are also available upon request. Flame retardant grade cable sheathing options are offered. Riser rated cable will be provided as standard. LSZH and Plenum can be provided upon request
Features
. Small form factor design
. Pull proof
. Non-optical disconnect performance
. High quality zirconia ferrules
. Materials meet RoHS requirements
. Riser, Plenum, and LSZH cables available
Applications
. Telecommunication
. Computer networks
. CATV networks
. Active device termination
. Instrumentation
ST Fiber Optic Patch Cord (ST Fiber Cable)
Description
The ST connectors used in our patch cords employ half-twist bayonet locking mechanism and high quality 2.5mm zirconia ferrules. They are fully compatible with existing ST type hardware.
In addition to basic testing, some mechanical and environmental tests per IEC or Telcordia are also performed periodically to guarantee the best quality. For standard patch cords, sampling check is performed on ferrule geometry to ensure high percentage of polished connectors meeting GR-326 requirements. For premium grade, ferrule geometry is tested on all patch cords to meet these GR-326 requirements.
Other than standard single mode and multimode fibers, OM2, and OM3 fibers are also available upon request. Flame retardant grade cable sheathing options are offered. Riser rated cable will be provided as standard. LSZH and Plenum can be provided upon request.
Features
. ST compatible bayonet coupling
. Metal body and zirconia ferrule
. Low insertion loss and high return loss
. Materials meet RoHS requirements
. Riser, Plenum, and LSZH cables available
Applications
. Local Area Networks
. Fast Ethernet
. Fiber Channel
. ATM Networks
. Instrumentation
FiberStore provides various types of optical patch cords including common single-mode 9/125, OM1 62.5/125, OM2 50/125, 10G OM3/OM4 patch cables, armored patch cables, fiber optic pigtails, multi core patch cables, MPO/MTP patch cables and other special patch cables. SC, ST, FC, LC, MU, MTRJ, E2000, APC/UPC terminations(fiber optic connectors) are all available.