The LC connectors used are small form-factor fiber optic connectors resembling miniature SC connectors with high quality 1.25mm zirconia ferrules and push-pull latching mechanism. They are fully compatible with existing LC hardware.
In addition to basic testing, some mechanical and environmental tests per IEC or Telcordia are also performed periodically to guarantee the best quality. For standard Fiber Optic Patch Cord, sampling check is performed on ferrule geometry to ensure high percentage of polished connectors meeting GR-326 requirements. For premium grade, ferrule geometry is tested on all patch cords to meet these GR-326 requirements. The following is LC to LC fiber patch cable, LC-LC fiber optic patch cables are used to send high-speed data transmissions throughout your network. LC/LC fiber optic cables connect two components with fiber optic connectors. A light signal is transmitted so there is no outside electrical interference.
Other than standard single mode and multimode fibers, G655, OM2, and OM3 fibers are also available upon request. Flame retardant grade cable sheathing options are offered. Riser rated cable will be provided as standard. LSZH and Plenum can be provided upon request.
The SC connectors used for our patch cords are designed to NTT-SC* standards and are fully compatible with existing SC hardware. Two simplex connectors can be configured into a duplex format by adding a duplex clip.
In addition to basic testing, some mechanical and environmental tests per IEC or Telcordia are also performed periodically to guarantee the best quality. For standard patch cords, sampling check is performed on ferrule geometry to ensure high percentage of polished connectors meeting GR-326 requirements. For premium grade, ferrule geometry is tested on all patch cords to meet these GR-326 requirements. The following is SC to SC fiber patch cable, SC to SC Fiber Optic jumper cords are primarily used in high bandwidth networks where you must send large amounts of data at high speeds. Use a SC to SC fiber jumper cable to connect two devices with SC connections. Since the data is sent via a light signal, there is no electrical interference. Multimode SC/SC fiber cables are used to send multiple light signals at a time throughout gigabit networks. They are usually used in shorter cable runs, and have inner core diameter of 62.5 micron. The 62.5um cables support distances to 275 meters.
Other than standard single mode and multimode fibers, G655, OM2, and OM3 fibers are also available upon request. Flame retardant grade cable sheathing options are offered. Riser rated cable will be provided as standard. LSZH and Plenum can be provided upon request.
Fiberstore offers the most complete selection and great quality fiber optic patch cables! We carry singlemode and multimode optical fiber patch cables with a variety of connector types such as LC, SC, ST, and MTRJ. Duplex fiber cables consist of two fiber cores and can be either multimode or singlemode.