Optic Switch is a device that enables signals in optical fibers or integrated optical circuits to be selectively switched from one circuit to another. In telecommunication, an optical switch is the unit that actually switches light between fibers, and a photonic switch is one that does this by exploiting nonlinear material properties to steer light (i.e., to switch wavelengths or signals within a given fiber). Hence a certain portion of the optical switch market is made up of photonic switches. These will contain within them an optical switch, which will, in some cases, be a photonic switch.
An optical switch may operate by mechanical means, such as physically shifting an optical fiber to drive one or more alternative fibers, or by electro-optic effects, magneto-optic effects, or other methods. Slow optical switches, such as those using moving fibers, may be used for alternate routing of an optical switch transmission path, such as routing around a fault. Fast optical switches, such as those using electro-optic or magneto-optic effects, may be used to perform logic operations; also included in this category are semiconductor optical amplifiers, which are optoelectronic devices that can be sued as optical switches and be integrated with discrete or integrated ,microelectronic circuits.
Types of optical switches
Optical switches can be divided into mechanical and non-mechanical ones according to the driving methods.
Mechanical optical switch relies on the movement of optical fiber or optical elements to convert the optical path, such as a mobile optical fiber type, moving the sleeve to move the lens (including mirrors, prisms and self-focusing lens) types. The biggest advantage of this kind of optical switch is a low insertion loss and low crosstalk. Its disadvantage is slow and easy to wear, easy to vibration, impact shocks.
Non-mechanical optical switch relies electro-optic, magneto-optic, thermo-optic and other effects to change the refractive index of the optical waveguide, the optical path changes, such as electro-optic switch, magneto-optic switch, and thermo-optic switch. This kind of optical switch has good repeatability, fast switching speed, high reliability, long life and other advantages, and small size, can be monolithically integrated. The disadvantage is that the insertion loss and crosstalk performance is not ideal, which should be improved.
There are three common types of optical switches: Opto-Mechanical Switch, Thermo-Optical Switch, Electro-Optical Switch.
Opto-Mechanical Switch
Opto-mechanical switch is the oldest type of optical switch and the most widely deployed at the time. These devices achieve switching by moving fiber or other bulk optic elements by means of stepper motors or relay arms. This causes them to be relatively slow with switching times in the 10-100 ms range. They can achieve excellent reliability, insertion loss, and crosstalk. Usually, opto-mechanical optical switches collimate the optical beam from each input and output fiber and move these collimated beams around inside the device. This allows for low optical loss, and allows distance between the input and output fiber without deleterious effects. These devices have more bulk compared to other alternatives, although new micro-mechanical devices overcome this.
Thermo-Optic Switch
Thermo-optic switches are normally based on waveguides made in polymers or silica. For operation, they rely on the change of refractive index with temperature created by a resistive heater placed above the waveguide. Their slowness does not limit them in current applications.
Electro-Optic Switch
These are typically semiconductor-based, and their operation depends on the change of refractive index with electric field. This characteristic makes them intrinsically high-speed devices with low power consumption. However, neither the electro-optic nor thermo-optic optical switches can yet match the insertion loss, backreflection, and long-term stability of opto-mechanical optical switches. The latest technology incorporates all-optical switches that can cross-connect fibers without translating the signal into the electrical domain. This greatly increases switching speed, allowing today’s telcos and networks to increase data rates. However, this technology is only now in development, and deployed systems cost much more than systems that use traditional opto-mechanical switches.
We supply optical switches based on Opto-Mechanical technology with proven reliability and the configurations are available as 1 x 1, 1 x 2, 2 x 2, etc.. Moreover, we offer non-latching, latching, single-mode and multimode versions. What’s more, we also suppy multi mode om3 armored fiber, if you would like to know more information about our products, please send your requirements to sales@fiberstore.com or call us.