FS.COM Supply 100GHz DWDM Mux Demux

DWDM Mux and DWDM Demux are designed to multiplex DWDM channels into one or two fibers. 100GHz DWDM Mux Demux is used to provide 100GHz transport solution for DWDM networking system. The common configuration is 4, 8, 16 and 32 channels, and we also have 40 and 96 channels. They are available in plug-in module and standalone 19″ 1RU or 2RU rack mount. These DWDM modules passively multiplex the optical signal outputs from 8 or more electronic devices, send them over a single optical fiber and then de-multiplex the signals into separate, distinct signals for input into electronic devices at the other end of the fiber optic link. We provide option of DWDM expansion port, monitor ports, 1310nm wideband port for existing 1310nm equipment.

AWG DWDM Modules – Planar Technology
FS.COM Thermal Arrayed Waveguide Grating (TAWG) DWDM modules are part of a series of high performance products based on silica-on-silicon planar technology. Our TAWG DWDM modules are designed for use within the C-band release of DWDM system. To decrease the power dissipation of the devices in different environmental conditions, the AWG package is special designed with selection of reliable thermal plastic with low thermal conduction, and the AWG operating temperature is controlled by using foil resist heater or Peltier TEC with thermistor temperature sensor.

100GHz DWDM Mux Demux

FS.COM 100GHz DWDM Mux Demux Solution
We supply common configuration 8, 16, 40 and 96 channels which is available in plug-in module and standalone 19″ 1RU/2RU rack mount. FS.COM provide option of DWDM expansion port, monitor ports, and 1310nm wideband port for existing 1310nm equipment. DWDM transceivers from FS.COM are together used in a cost effective way. DWDM is a proven technology, which offers flat channel bandwidth, flexible channel configuration, low insertion loss and high isolation. Modules are available on the C bands, ITU 100GHz grid at channel spacing of 100GHz.

QQ截图20171017150426

DWDM MUX and DEMUX Types
1. DWDM MUX DEMUX with Monitor Port
Many technicians will add a monitor port on DWDM MUX/DEMUX for better network monitoring and management. If you choose a single-fiber DWDM MUX DEMUX, the monitor port should be a simplex fiber optic port. For dual-fiber WDM MUX DEMUX, you can add a duplex monitor port for the whole network monitoring, or just add a simplex port for MUX or DEMUX monitoring.

1

2. DWDM MUX DEMUX with Expansion Port
Expansion port added on DWDM MUX DEMUX is really useful. If you installed a DWDM network which just using several of the DWDM wavelengths, you can use this expansion port to increase the network capacity by connecting the expansion port with the line port of another DWDM MUX DEMUX supporting different wavelengths. Then the network of this CWDM network can be increased easily.

QQ截图20171017150306

3. DWDM MUX DEMUX with 1310 Port
The 1310nm port is used in some legacy networks and sometimes as a return path. If an existing legacy network is using 1310nm port and they have exhausted all fibers and are looking for ways to increase their network capacity they can add in other DWDM wavelengths on to the same fiber while still allowing the use of the 1310nm port. Meanwhile, it can carry LR optics, LX optics etc.

3

FS.COM, as a 3rd party OEM manufacturer, we supply various 100GHz DWDM MUX DEMUX. Customer can select DWDM wavelength from ITU Grid C-Band C15 to C62. Customer can select LC/UPC, LC/APC, SC/UPC, SC/APC, FC/UPC, FC/APC, ST/UPC, ST/APC etc as connectors. Customer can select plug-in module or 1RU rack mount chassis as housing. Customer can add monitor port, expansion port and 1310 port. As a professional optical communication products manufacturer, we also supply CWDM MUX, 100G DWDM Muxponder, and FMT DWDM Optical Transport Network System.